高直流电压小工作电流试验台装置仪（耐弧光试验台装置仪）-（来网络设备控住）

High voltage low current tester (arc resistance tester) - (computer control)

成商品编码称：耐电弧试验机

Product name: electric arc resistance tester

新产品款型：NDH-A

Product model: NDH - A

无法原则：GB/T 1411-2002《胶体绝缘层产品耐高压得很低的感应电流脉冲电流的检验》（等同于IEC  61621-1997）及ASTM D495等标的规范要求设计构思产生的，并具有IEC 149、UL 746A等疲劳试验方式方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

基本符合依据及职能：

本冲击压力试验机是明确APP于伺服电机、物品和家庭型物品等该行业的低压电工用塑胶、环氧不饱和树脂胶和隔热漆等隔热资料的耐电孤放电耐腐蚀性鉴定，主于无水硫酸铜隔热资料如：塑胶、pe膜、环氧不饱和树脂、矿石、工业陶瓷、磨砂玻璃、隔热油、隔热漆、纸箱等媒质的耐电孤放电耐腐蚀性測試；

本调查设计室室检测机由算起机掌控程序运行，也可以展示特定调查设计室环境及调查设计室事件，调查设计室完成后并存有特定调查设计室大数据，并可直接打印.标工作报表。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为升降内置式形式，中下部为进行操作控制系统，上端为可靠性湿热试验箱。

2 本产品设备选取*新智力调整技能，采用选泽步骤（IEC或ASTM）可自动式去试验装置，并在电子产品上展现检测阶段和结杲。

3 **的性能非常好，抗干预能力素质强，测试软件高精准性高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断事件计算误差：乘以 ±10ms

2 调压器储电量：2kVA

3 固定实验设计直流电压：12.5kV

4 实验设计电阻精密度：±3%

5 电压电流调节精密度：±10%  电流大小在测量定位精度：1.5%

6 工业对试件各种压力：（0.5±0.05）N

7 电极物料物料：钨棒

8 探针间隔：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 施用情况工作温度：（23±2）℃

10 操作环镜温度：（50±5）%

11 主机电源：220V±5%  50Hz  10A

12 现场实验    方式 ：   标准/美标/10 mA 陆续/20 mA 维持/30 mA陆续/40 mA反复

13 试验装置过程正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物料型号查询：

NDH-A    耐脉冲做实验的时候仪-微机操控

NDH-B    耐弧光疲劳试验仪-手触屏把控好

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！